Ubuntu beats OpenSuse: Upgrading Versions

Take a look at this warning on the OpenSuse website:
Warning: Updating from one version to another is unsupported and may result in system inconsistencies. Performing distribution upgrades in the running system increases the risk of causing damage.
If you ask me, not being able to upgrade my operating system is major problem. Fedora also appears to have sub-par support for upgrading from one version to the next. Take a look at this warning on the Fedora wiki:
Although upgrades with yum have been tested and work, live upgrades are not recommended by the Fedora Project. If you are not prepared to resolve issues on your own if things break, you should probably use the recommend installation methods instead. With a typical installation, this method usually works well, but it can break third-party packages not available in the Fedora repositories. Please search the mailing list archives first if you run into problems.
Based on the information on that page, it appears that upgrading Fedora can be simple, but it is definitely not recommended. While this is not as bad as the Suse warning above, I would still be nervous to upgrade Fedora.

For comparison, you can read on the Ubuntu wiki about how easy it is to upgrade to a new version of Ubuntu. Anyone got a testimonial about your experience with upgrading an operating system?

Comments

  1. MicrowaveSafe1/23/2007 4:59 PM

    I have updated Ubuntu from Dapper to Edgy using Synaptic, it worked fairly well, though I did have a problem with an apparent regression in xmodmap, but that is based on the version Edgy uses and happened even on a clean install on another computer.

    My friend uses Open Suse and couldn't get an update to work at all so ended up doing a fresh install which was painful for him because he hadn't seperated out his home folder (I helped him set it up properly on this install though).

    ReplyDelete

Post a Comment

Popular posts from this blog

Using the Cisco console in Linux

Image
Introduction People who work with Cisco network equipment need to be able to connect to the console port on their devices. In Windows, you can simply fire up HyperTerminal to get basic access to your devices. If you are using Linux, then you need to know how this can be done with an application called Minicom . Hardware First, you are going to need a Cisco console cable , a Cisco device, and a computer. If your computer has a serial port , then you can use the standard console cable that comes with every Cisco device. If you do not have a serial port (like most new laptops), then you need to purchase a USB to Serial adapter that supports Linux. This device will allow you to use the standard Cisco cable, which has a serial port on one end. Install Minicom You can easily install Minicom by using "System > Administration > Synaptic Package Manager". Search for "minicom" and choose to install the package. Click "Apply" and Minicom should be insta
Read more

Linux NIC teaming recommendations

Image
Introduction In my job as a network engineer, I am constantly looking for ways to increase the availability of the network. This is especially true in the data center, where services are expected to always be available. One of the ways to increase the network availability of a server is by using multiple network interfaces. This technique has many different names, but I am just going to call it NIC teaming. Purpose of NIC Teaming NIC teaming increases network availability by removing single-points-of-failure (SPOF). These SPOFs are components that will cause a service outage if they become unavailable. If we consider a single network connection from your server to your switch, we can identify quite a few SPOFs: Server NIC failure Network cable failure (such as being cut or unplugged) Network switch failure (such as a planned firmware upgrade or unplanned outage) Methods of NIC Teaming The reason I am writing this blog is to help people understand the different options for NIC team
Read more

What it takes to make Ubuntu ready for use

I recently installed Ubuntu 6.10 on a new PC at work. In this post I will document all the steps I had to perform to get it ready for everyday use. Each step is assigned a level of difficulty, which I define below: Very Easy Step can be completed without using the command prompt Intuitive to complete Easy Step can be completed without using the command prompt May require searching to find the right place to make the change Medium Requires a single command to be entered at the command prompt Requires searching internet resources to find the solution Hard Requires multiple commands to be entered at the command prompt Requires searching internet resources to find the solution Very Hard Requires multiple commands to be entered at the command prompt Requires searching internet resources to find the solution Requires the user to manually edit a configuration file These criteria are quite strict, because I believe that using an operating system should be intuitive, and not require any spec
Read more