Utah Release Party: Ubuntu, Fedora, OpenBSD

Yesterday we held a release party in Salt Lake City, Utah to celebrate the release of several open source operating systems. The original announcement only mentioned Ubuntu 8.04 LTS and Fedora 9, but we realized during the party that OpenBSD 4.3 was released on May 1st.

We were all happy to celebrate the goodness of open source, without arguing over which distro was better. The Fedora guys showed us some cool improvements, and the Ubuntu guys also demonstrated some neat improvements. The great thing about open source is that all of these improvements will be shared by both distributions in a future release.

I want to say thank you to our excellent sponsors who made this party a success. First, the amazing location was provided by the web-development company Code Greene. Second, the delicious Chipotle burritos were donated by the Utah Open Source Foundation, ran by Clint Savage. Lastly, thanks to the Fedora project who contributed funds, and Ubuntu/Canonical who contributed swag (including hundreds of 8.04 CDs).

Here is a picture of the three Ubuntu babies! This is the second release party for my girl Chloe (on the right).

We had an estimated 50 people at this party, but there is not one shot that includes them all. We do have physical evidence that 32 burritos were eaten and many people did not get one.

Here is Clint Savage doing his best impression of a good speaker. Just kidding Clint, you did a great job! Thanks for helping foster open source communities in Utah.
Notice the Fedora posters and foosball table in the background. This web-development company also has a kitchen, ping-pong table, an air-hockey table, a gigantic over-sized chess set, and a high-def theater that was playing the original Star Wars. Sounds like a great place to work!

Comments

  1. Anonymous5/05/2008 9:30 AM

    This is awesome, keep up the good work guys

    ReplyDelete
  2. althea8/21/2008 9:05 AM

    DimDim is a great option for anyone who prefers to use open source software. The source code is always available on their website if you want to host your own web conferencing that includes all of the features of DimDim. They even offer a virtual appliance that can be used for a painless install of DimDim.
    ---------------
    nickysam

    Utah Drug Treatment

    ReplyDelete

Post a Comment

Popular posts from this blog

Using the Cisco console in Linux

Image
Introduction People who work with Cisco network equipment need to be able to connect to the console port on their devices. In Windows, you can simply fire up HyperTerminal to get basic access to your devices. If you are using Linux, then you need to know how this can be done with an application called Minicom . Hardware First, you are going to need a Cisco console cable , a Cisco device, and a computer. If your computer has a serial port , then you can use the standard console cable that comes with every Cisco device. If you do not have a serial port (like most new laptops), then you need to purchase a USB to Serial adapter that supports Linux. This device will allow you to use the standard Cisco cable, which has a serial port on one end. Install Minicom You can easily install Minicom by using "System > Administration > Synaptic Package Manager". Search for "minicom" and choose to install the package. Click "Apply" and Minicom should be insta
Read more

What it takes to make Ubuntu ready for use

I recently installed Ubuntu 6.10 on a new PC at work. In this post I will document all the steps I had to perform to get it ready for everyday use. Each step is assigned a level of difficulty, which I define below: Very Easy Step can be completed without using the command prompt Intuitive to complete Easy Step can be completed without using the command prompt May require searching to find the right place to make the change Medium Requires a single command to be entered at the command prompt Requires searching internet resources to find the solution Hard Requires multiple commands to be entered at the command prompt Requires searching internet resources to find the solution Very Hard Requires multiple commands to be entered at the command prompt Requires searching internet resources to find the solution Requires the user to manually edit a configuration file These criteria are quite strict, because I believe that using an operating system should be intuitive, and not require any spec
Read more

Five ways to use Windows apps in Linux

Image
1. Use an open source alternative instead When someone asks me if they can run "Windows Application X" on Linux, the first thing I tell them is to look for an open source alternative. For most Windows applications, there will be a high-quality open source alternative that can meet their needs. The biggest hurdle for non-Linux people is simply knowing that these alternative exist and how to find them. The best place I have found to search for these applications is at www.osalt.com . On that site, you can enter the name of the Windows application and it will list the open source alternatives that provide similar functionality. Be sure to check it out. 2. Buy a commercial product that was designed for Linux If you cannot find an open source alternative, and you have not already purchased a Windows application, then you should consider purchasing a commercial product that was designed for Linux. Here is a story of a civil engineer who wanted to find an open source replacemen
Read more